Wind turbine FSH400 at 12V and 24v with external MPPT regulator. Ideal for small land or marine installations
DETAILS
The small wind turbine FSH400 has a perfect aerodynamic design. The design of the tail damping allows to reduce strong blows of wind. This wind turbine can work at wind speeds between 3m / s (6.7 mph) and 20m / s (44.7mph). In addition the innovative nose cone lock design ensures that it will never come off.
Noise reduction design; In comparison with the traditional blades of the wind turbine, the noise level can be reduced by half (with a wind speed of 12m / s, 10 meters away, the noise is only 58dba). It has a high quality silicon steel sheet for the alternator, improving its efficiency. In this way the alternator can produce up to 10% more energy with the same wind speed.
characteristics
Light weight
Silent shovels (10 meters only 58dba of noise)
Improvement in the output of the alternator (at the same wind speed 15% more output power is achieved)
Working speed from 3m / s to 49.2m / s
Rotor diameter: 1.2m (47 “)
Weight: 5.5Kg (12.3 lbs)
Shipping dimensions: 672 x 350 x 210mm (26.5 “x 13.8” x 8.3 “) / 7.8Kg (17.2lbs)
Mounting: 1.5 “Schedule 40 tube (1.9” OD, 48mm)
Material; NdFeB (neodymium-iron-boron)
Standard sealed bearing
Stainless steel shaft
Stainless steel fastening elements (screws and nuts)
Starting speed: 3.13 m / s (7mph)
Working voltage: 12 to 24VDC
Rated power: 400W at 12.5m / s (28mph)
Controller: microprocessor based on an intelligent external controller with MPPT
Shovels: carbon fiber composites
Body: cast aluminum (in the Marine version the body has powder coating for protection against corrosion)
Energy production: 38kWh / month at 5.4m / s (12mph)
Warranty: 3 years
Maximum wind speed: 49.2m / s (110mph)
Protection against excessive speed by electronic torque control
Minimum battery bank: 100Ah to 12V, 50Ah to 24V
Intelligent external controller with MPPT controller
Automatic protection circuit
High protection against excess wind
Led screen
Overload protection
