The 230v mono or three-phase 2cv solar pumping kit works with only 5 solar panels for up to 6 hours a day at 50 Hz performance.
With the direct solar pumping kit without batteries, a pump of up to 2cv single-phase or three-phase 230v can be operated with a generator or light input to be able to power the system even on cloudy days. The direct solar pumping kit allows operation with only 5 solar panels thanks to its internal voltage booster. Up to 6 hours a day at full 50Hz performance.
The operation of the solar kit for pumping up to 2 hp is as follows:
The solar pumping kit for single-phase or three-phase 230v pumps up to 2hp allows the use of energy from solar panels to run a pump up to 2hp. The 3cv INVT pumping panel starts and operates the pump when solar energy is available.
Through this direct solar pumping kit we can run a 2cv pump for up to 5 hours a day in summer months at full 50Hz performance. Calculated for a central area of Spain.
Direct solar pumping kit is expandable
With this direct solar pumping kit we can add more solar panels if we want to increase the hours of irrigation or use of the pump. using 2 more panels we can reach 8 hours of daily operation at 50Hz
The pumping panel allows the use of pumps up to 3cv
Components of the solar kit for direct pumping up to 2 hp
10 solar panels 340w PERC CSUN: It is a high efficiency polycrystalline solar panel, it has a high transmission of electricity thanks to its 5 bus bar connections in the cells.The PERC cells of the module are a dielectric layer that allows to take advantage of radiation that before it ended in the last layer of aluminum of the panel. By taking advantage of it to increase power, we reduce the heat that is transmitted to this last layer in a conventional cell and improve performance. CSUN is a TIER 1 manufacturer with a high quality in the production processes of its solar panels.
Invert 3cv pump controller: It is a control panel for single-phase and three-phase 230v pumps with a maximum power of 3cv). It has a screen for viewing and adjusting the pumping parameters, it also has different inputs for well probes to stop and start the pump depending on the level conditions. It has an input to use an alternative source such as a generator or 230v light.
Structure for 10 30º floor or roof panels: In the kit we include an aluminum structure for the 30º inclination photovoltaic modules, ready to be installed on the ground or on metal sandwich-type roofs. The structure comes with all the hardware for assembly and the instruction manual with a detailed plan.
Solar wiring and connectors: The kit includes 40 meters of 6mm unipolar RV-K solar cable for connecting the panels to the controller and the pump, as well as a set of Pv stick mc weidmuller connectors for easy mounting.
