The Solar Pumping Kit for 0.75cv, a direct solar pumping system adapted to 230V three-phase pumps with a maximum power of 0.75cv.
Characteristics of the Solar Pumping Kit system for 0.75cv
The photovoltaic system proposed in the annex can generate 6.08 kWh per day (3 hours of sun) in winter and 14.18 kWh per day (7 hours of sun) in summer.
The recommended system characteristics are as follows.
Installed solar generation: 2,025W
Daily production in winter: 6.08 kWh
Summer daily production: 14.18 kWh
Annual average daily production: 10.13 kWh.
Components of the Solar Pumping Kit for 0.75cv
5 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.
1 x Structure 4 Panels 30-45 mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 15m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 15m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x INVT BPD 1HP 0.75KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 1CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.
1 x WEIDMULLER PVStick Connector – Most recommended if you don’t have crimp tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.
