Hybrid Solar Kit Car Charger 6000W 30kWhdia Ingeteam, its shape and dimensions allow it to use the maximum possible power.
Characteristics of the 6000W 30kWhdia Ingeteam Hybrid Solar Car Charger Kit system
The photovoltaic system provided in the attached file can generate 19.11 kWh per day in winter (3 hours of sunshine) and 44.59 kWh in summer (7 hours of sunshine).
The characteristics of the proposed system are the following:
Installed solar generation: 6,370 W
Daily production in winter: 19.11 kWh
Summer: daily production: 44.59 kWh
Annual average daily production: 31.85 kWh
Components of the Hybrid Solar Kit Car Charger 6000W 30kWhdia Ingeteam
14 x 455W JA Solar Mono PERC Solar Panel: guaranteed for 25 years and made of monocrystalline silicon from the famous international brand JA Solar. It offers one of the best products for our photovoltaic systems, as it is one of the best-performing monocrystalline models with excellent value for money. It can supply the solar system with about 1,350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the size of the module. It measures 2112 x 1052 x 35mm and includes a junction box for each positive and negative cable with MC4 connectors at each end. The solar module includes an attached aluminum frame that allows it to be attached to any structure, allowing for additional dimensions.
+1 x Ingeteam Ingecon Sun Storage 6TL M Hybrid Inverter: there is the option of storing surplus production in batteries. The electricity can be directly converted to 230V and supplied for consumption, and the extra energy generated by the panel can be stored to charge the battery. At night, the inverter powered the house mainly from battery charges, which could be stored throughout the day. If it is insufficient, it draws energy from the network so that the supply is not lost. When the sun comes out again, it takes over consumption and recharges the battery with solar energy. With two MPPT trackers, compatible with lithium battery packs from different manufacturers such as LG, BYD, Pylontech. It can work in isolated mode or connect to the network for self-consumption.
1 x Carlo Gavazzi EM112DIN Wattmeter: a device tuned to measure the amount of energy flowing through your home, optimizing the energy delivery of your inverter to the maximum to avoid feeding the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular Carlo Gavazzi model that is widely compatible with many inverters on the market.
4 x Pylontech H48050 48V HV Lithium Battery: lithium ferrophosphate batteries that allow us to offer lithium technology batteries with very attractive technical characteristics at very competitive prices. Model designed for high voltage systems in which it is necessary to connect several identical models in series, since each module provides 48 V independently. Easy stacking makes it easy to store in a standard 19-inch rack cabinet. They are all monitored by a BMS that needs to be added depending on the system required. about download. Its life cycle is more than 10 years, it has more than 4000 cycles, and it has all the necessary certifications. Compatible with a wide range of inverter systems such as Ingeteam, Growatt and Solax.
1 x Pylontech SC0500A HV BMS – This device acts as the interface and controller for the Pylontech H48050 48V HV lithium battery cell. This component is necessary to form a Pylontech high voltage lithium system. The SC0500 BMS has an operating range of 100-430 VDC and a maximum charge and discharge of up to 100A. A system using the SC0500 BMS must contain a minimum of 3 and a maximum of 7 Pylontech H48050 modules. This component remains connected in series with the battery module using the wiring provided, but is connected via a data cable to a power cable that allows the inverter and battery bank to be charged and discharged. It has the same rack format as the battery and can be easily placed in the same cabinet.
1 x 19″ Rack for up to 10 Pylontech DC EM-S 6627 units: it is a robust construction that allows the correct assembly, connection and placement of Pylontech battery modules and allows any type of battery in standard 19″ format. There are slots to facilitate proper ventilation of the internally mounted battery and casters or feet to move the system when needed or to secure it anywhere. Compartments to support batteries are not included.
3 x EM-S D600 Rack Tray: used to house this type of battery inside the cabinet. This case supports about 50 kg of weight and helps to better distribute the weight of the battery so that the battery is not supported only in the front.
1 x Orbis Viaris UNI BT2 Type 2 7.4kW electric car charger – Wi-Fi: 7.4kW single-phase smart charger output through type 2 hose with cover. With the e-VIARIS mobile application you can, among other things, monitor the charger and control the requested power.
1 x Orbis 100A single-phase wattmeter direct measurement
2 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of 5 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
2 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 60m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Pylontech LV Battery-Inverter Cables: allow power and data to be connected between Pylontech batteries and the inverters that connect them. 2 meter long 4 AWG cables supporting up to 120A and 3 meter communication cable with crimp for CAN communication.
1 x Pylontech – Ingeteam – SPH Communication Cable: shock cable to attach Ingeteam and Growatt SPH brand inverters to the main battery.
2 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.
