The Isolated Housing Solar Kit 1000W 12V 3000Whdia, a small system that powers appliances and lights in summer houses.
Characteristics of the Solar Kit system Isolated House 1000W 12V 3000Whdia
The photovoltaic system provided in the attached file can generate 1.80 kWh per day in winter (3 hours of sunshine) and 4.20 kWh in summer (7 hours of sunshine).
The characteristics of the proposed system are the following:
Installed solar generation: 600 W
Daily production in winter: 1.80 kWh
Summer: daily production: 4.20 kWh
Annual average daily production: 3.00 kWh
Components of the Solar Kit Isolated House 1000W 12V 3000Whdia
3 x MUST 200W 12V Monocrystalline Solar Panel: suitable for caravans and 12V installations. It consists of 32 monocrystalline cells, weighs 10.3 kg and has dimensions of 1290 × 760 × 30 mm. The efficiency of the module is 20.4%, making it a very good option for small isolated houses with 3 or 4 panels and a 12V battery installed.
1 x Structure 3 Panels 30-45mm Coplanar Falcat: structures of the same type using the appropriate connection kit. Support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple.
2 × 6V 450Ah Tensite Battery: it is special for solar energy. It offers superior performance compared to traditional monoblock batteries for small solar systems. The promise of long life makes them a compromise between block and stationary accumulators for more demanding systems.
1 x Must Solar 1000W 12V Inverter Charger Pre-Assembled with Guards – This is a pre-assembled kit containing the Mast Solar 1000W 12V Isolated Inverter which provides up to 1000W of output power from a 12V battery. The inverter has an input for the solar panel and is used to supply power and charge the 12V battery. This energy passes through an internal PWM charge controller with a charging power of 50A and is used to boost the battery charge and prepare it for use. A 12V battery charger with up to 20A charging force is also included in case you need to charge the battery via a compatible generator or external power source. The entire set is pre-assembled and wired on a metal plate that can be easily hung on the wall. Simply connect the input of the solar panel to the corresponding input of the fuse that protects it, and connect the load to the output of the circuit breaker. The iron shield should be placed high enough so that the battery cables can reach the battery terminals well.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll 10mm2 Single Wire Cable H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll of Single Wire Cable 10mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Waterproof Box 150×110×70mm: ideal for installing the Legrand energy distributor inside. Both 40A and 100A are available for large installations.
1 × 100A Module Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From this point on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.
3 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.
1 x Interconnection Cable with Battery Terminals: Cable to connect a monobloc battery when used in a 24V or 48V installation, or to double the battery amperage if necessary.
1 x Set of Monoblock Battery Terminals: being able to wire the connection to the battery is very convenient. This type of battery pole is suitable for batteries with tapered poles. Includes positive and negative connections.
