The 3000W 48V 18150Whdia Self-Consumption Solar Kit is a self-consumption system that stores surplus solar energy.
Characteristics of the Solar Kit Self-consumption system 3000W 48V 18150Whdia
The photovoltaic system proposed in the annex can generate 10.50 kWh per day (3 hours of sun) in winter and 24.50 kWh per day (7 hours of sun) in summer.
The total storage capacity of the supplied battery is 7.20 kWh. For reasons of durability and maintenance, it is not recommended to discharge the battery beyond 91% of its total capacity, so the useful energy stored in the battery is 6.55 kWh.
The recommended system characteristics are as follows.
Installed solar power: 3,500W
Daily production in winter: 10.50 kWh
Summer daily production: 24.50 kWh
Annual average daily production: 17.50 kWh
Total battery capacity: 7.20 kWh
Practical battery storage: 6.55 kWh
Components of the Self-consumption Solar Kit 3000W 48V 18150Whdia
7 x Solar Panel 500W Deep Blue 3.0 JA Solar: It has some very special features. It contains a half cell that provides a very high level of efficiency at 500W of power. It uses PERC technology and is made by the world-famous manufacturer JA Solar. The 500W Deep Blue Solar Panel is a Ja Solar brand panel, one of the best manufacturers seen in the industry today. This range has PERC-type monocrystalline cells that give the panels magnificent technical properties. These cells offer the potential for higher productivity and efficiency than regular panels with the same number of cells.
1 x Ingeteam Ingecon Sun Storage 3TL M Hybrid Inverter: possibility of storing surplus production in batteries. Electricity can be directly converted to 230V and supplied as consumption, and the extra power generated by the panel can be stored to charge the battery. At night, the inverter supplied electricity to the house, mainly from the battery charge, which could be stored for the whole day. If it is insufficient, it draws energy from the network so that the supply is not lost. When the sun rises again, it will take over the consumption and recharge the battery with solar energy. It uses two MPPT trackers that are compatible with lithium battery packs from various manufacturers such as LG, BYD and Pylontech. It works in isolation mode or grid connection self-consumption mode.
1 x EM112DIN Carlo Gavazzi Wattmeter: a device tuned to measure the amount of energy flowing through your home, fully optimizing power delivery from your inverter to avoid feeding into the grid or increase production according to your preferences You can control or in a self-consumption configuration. A very popular model by Carlo Gavazzi that is widely supported by many inverters on the market.
3 × 2.4kWh Pylontech US2000C 48V Lithium Battery: advanced Lithium-ion Phosphate batteries available with lithium technology batteries with very attractive technical characteristics at a very competitive price. Thanks to the easily stackable format, up to 80 batteries can be connected in parallel in groups of 16 units, as technology allows. Everything is monitored by an internal BMS that distributes power between cells and modules to prevent overcharging or overdischarging. This characteristic of lithium batteries is important to ensure a long life.
2 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimp tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.
3 x Pylontech 2.4kWh US2000 48V Brackets: Pylontech 2.4kWh US2000B Plus 48V Lithium Battery Brackets allow Pylontech US2000B Plus 48V 2.4kWh Lithium Battery Modules to be firmly attached with space needed for ventilation and adequate fixing between modules. Pylontech 2.4kWh US2000B Plus 48V brackets are required if a rack cabinet is not available for this battery model.
1 x Pylontech LV Battery-Inverter Cables: allow power and data to be connected between the Pylontech batteries and the inverters that connect them. 2 meter long 4 AWG cables supporting up to 120A and 3 meter communication cable with crimp for CAN communication.
1 x Structure 3 Panels 30-45mm Coplanar Falcat: support to allow the placement of 3 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
