The Isolated Housing Solar Kit 5000W 48V 18000Whdia, a system that can cover the consumption of a permanent home.
Characteristics of the Victron 5000W 48V 18000Whdia Solar Kit system
The photovoltaic system provided in the attached file can generate 14.58 kWh per day in winter (3 hours of sunshine) and 34.02 kWh in summer (7 hours of sunshine).
The characteristics of the proposed system are the following:
Installed solar generation: 4,860 W
Maximum output power to the box: 5000VA
Daily production in winter: 14.58 kWh
Summer: daily production: 34.02 kWh
Annual average daily production: 24.30 kWh
Components of the Victron Solar Kit 5000W 48V 18000Whdia
12 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: 405W Deep Blue 3.0 JA Solar Mono Solar Modules have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.
1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.
2 x Structure 6 Panels 30-45mm Coplanar Falcat: support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
8 x ROLLS 6V S6 L16-HC S550 battery: 2-year warranty and 5-year extendable warranty. They are specially designed for solar energy, so they withstand slow daily discharges very well. Its life expectancy is about 1,500 cycles, understanding by cycle the process of full charge and discharge of a battery. In general, it is strongly recommended not to discharge the battery more than 30% of its full capacity. This allows the battery to last longer and achieve an estimated useful life of 8-10 years. The battery connection jumper is included in the scope of supply. To properly connect the stationary battery, the various batteries must be connected together as attached in the installation guide.
1 x 5000W 48V MPPT 80A Must Solar Inverter Charger: Provides a very convenient solution for off-grid solar power systems as all system components can be integrated into the same device. You can see how the power is flowing as well as battery voltage and state of charge, real-time solar panel input amperage and battery output amperage, and a small graph on the same screen. When we leave, the support generators we can have. The output power of the inverter is 5000W, the maximum load of the battery charger is 60A, and it integrates a 80A MPPT Maximizer charge controller to connect the panel up to 4000W. After the thirteenth solar panel, additional installation of a charge controller is required.
1 x 5000W 80A MPPT Electrical Material Kit: a set of all the necessary equipment and accessories to correctly install the 5000W 80A MPPT Solar Energy Kit. Thanks to its components, the installation is simple and the subsequent handling of each component is also simple.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 15m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 15m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
15 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.
15 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Black: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.
1 x Unifilar Cable 50 mm2 POWERFLEX RZ-1K Green: special for electrical installations. Halogen free power cable. It is a flexible power cable designed for the most demanding industrial needs such as: low voltage industrial connections, urban networks, installations in buildings.
1 x Unifilar Cable 50 mm2 POWERFLEX RV-K Black: special for installation electrical lations. Halogen free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, installations in buildings.
1 x Watertight Box 150x110x70mm: ideal for installing the Legrand power distributor inside. Both 40A and 100A are available for large installations.
1 x 100A Modules Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From now on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.
4 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.
4 x 50mm Cable Eye Terminal – 8mm Eye: used to crimp 50mm gauge cables and connect 8mm diameter studs.
7 x Battery Interconnection Cable: measured at the provided terminals, depending on the diameter of the battery screw to connect. It has all the technical properties that allow batteries to be interconnected in complete safety.
