The Pylontech 14kWh 5000W 18500Whdia Lithium Solar Kit, a system that can cover the consumption of a permanent home.
Characteristics of the Pylontech 9kWh 5000W 19800Whdia Lithium Solar Kit system
The solar power system proposed in the annex can generate 10.94 kWh per day (3 hours of sunshine) in winter and 25.52 kWh per day (7 hours of sunshine) in summer.
The total storage capacity of the batteries offered is 14.40 kWh. For reasons of battery life and maintenance, it is not recommended to discharge the battery beyond 91% of its full capacity, so the usable energy stored in the battery is 13.10 kWh.
The recommended system characteristics are as follows.
Installed solar power: 3,645W
Daily production in winter: 10.94 kWh
Summer daily production: 25.52 kWh
Annual average daily production: 18.23 kWh
Accumulated storage battery: 14.40kWh
Useful battery storage: 13.10 kWh
Components of the Pylontech 14kWh 5000W 18500Whdia Lithium Solar Kit
9 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: 405W Deep Blue 3.0 JA Solar Mono Solar Modules have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.
1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.
1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of four solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Structure 5 Panels 30-45mm Coplanar Falcat: support to allow the placement of five solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
6 x Pylontech US2000C 48V 2.4kWh Lithium Battery: advanced Lithium-ion Phosphate batteries available with lithium technology batteries with very attractive technical characteristics at a very competitive price. Thanks to the easily stackable format, up to 80 batteries can be connected in parallel in groups of 16 units, as technology allows. It’s all monitored by an internal BMS that distributes power between cells and modules to prevent overcharging or over discharging. This feature of lithium batteries is important to ensure a long service life.
1 x Rack 19″ up to 10 Pylontech DC EM-S 6627 units: the Rack 19 up to 10 Pylontech DC EM-S 6627 units, is a robust construction that allows the correct fixing, connection and placement of battery modules with the most diverse characteristics of 2.4kWh Pylontech US2000B Plus 48V and 3.5kWh Pylontech US3000 Plus 48V batteries. And finally, for each type of standard 19-inch format battery. The Pylontech 1866 Battery Rack Cabinet has slots to facilitate adequate ventilation of the batteries installed inside, and wheels or feet to move the system when needed or to secure it anywhere. Battery support compartments are not included.
4 x EM-S D600 Rack Tray: used to house this type of battery inside the cabinet. This case supports about 50 kg of weight and helps to better distribute the weight of the battery so that the battery is not supported only in the front.
1 x Voltronic Axpert King 5000W 48V Rack Inverter: Provides a very practical solution for off-grid solar power systems, as all system components can be integrated into the same device, some brackets. On the front, you’ll find a small graphic on the same screen, plus an LCD display that lets you see battery voltage and charge status, real-time input amp from the solar panel, and battery voltage. This allows you to see the flow of power, whether it’s coming directly from the battery or from an emergency generator located in the solar system. The inverter is a pure sine wave inverter, the battery charger has a maximum load of 60A and an automatic start signal, and it integrates an MPPT maximum charge controller of 80A to connect the panel up to 4000W. The King series is compatible with Pylontech lithium batteries, and the scalability of this system allows you to add more inverters in parallel to obtain more power in the same installation.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
20 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.
20 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Black: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.
2 x 16mm Cable Eye Terminal – 8mm Eye: used to crimp 16mm gauge cables and connect 8mm diameter screws.
1 x Watertight Box 150x110x70mm: ideal for installing the Legrand power distributor inside. Both 40A and 100A are available for large installations.
1 x 100A Modules Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From now on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.
3 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.
1 x Pylontech LV Battery-Inverter Cables: allow power and data to be connected between Pylontech batteries and the inverters that connect them. 2 meter long 4 AWG cables supporting up to 120A and 3 meter communication cable with crimp for CAN communication.
