The Residential Photovoltaic Solar Kit 5000W 24V 12000Whdia, a system to power the consumption of a habitual residence.
Characteristics of the Residential Photovoltaic Solar Kit system 5000W 24V 12000Whdia
The photovoltaic system offered in the attached document is capable of generating 7.29 kWh per day in winter (counting on 3 hours of sunshine), while in summer, production would amount to 17.01 kWh per day (counting on 7 hours of sun).
The characteristics of the offered system are:
Installed Photovoltaic Solar Power: 2,430 W
Maximum output power to housing: 5000VA
Daily production in WINTER: 7.29 kWh
Daily production in SUMMER: 17.01 kWh
Annual AVERAGE daily production: 12.15 kWh
Components of the Residential Photovoltaic Solar Kit 5000W 24V 12000Whdia
6 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.
1 x Structure 6 Panels 30-45mm Coplanar Falcat: It is a support to be able to place 6 solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.
1 x Victron Smart Solar MPPT 150V 85A Regulator: It is a controller with a charge current of up to 85A and a voltage of up to 150V. In addition, the Smart Solar MPPT 150/85 charge controller has ultra-fast Maximum PowerPoint Tracking (MPPT). The Smart Solar MPPT 150/85 charge controller has advanced detection of the maximum PowerPoint in the event of partial cloud cover. On the other hand, the Smart Solar MPPT 150/85 charge controller model, offered by AutoSolar, has exceptional conversion efficiency, a flexible charging algorithm, reprogrammable auxiliary relay, as well as extensive electronic protection. It has a 5-year guarantee.
1 x Victron Multiplus 24V 5000VA 120+100A Inverter: 5000VA inverter that will allow this power to be consumed at the same time. In addition to being a pure sine wave inverter, it incorporates a battery charger; This inverter has a function that allows the electrical network or the generator to be interconnected to it, and in the event that the batteries are exhausted, it will be the same inverter that starts the generator (in the event that the generator has automatic start) or the that gives way to the electrical network to charge the batteries, so that we will never run out of service and the state of charge of the batteries will not bother us in any way. Once the generator or the electrical network enters, the batteries will be charged and when they are at an optimal level, it will be the inverter that cuts off the supply from the electrical network or the generator and goes back to the normal state, which will be to charge the batteries using solar panels. The charger of this inverter is 120A at 24V.
12 x Solar Battery OPzS 739Ah 2V Formula Star: They have an average life of more than 2500 cycles depending on the depth of discharge, understanding a cycle as a complete charging and discharging process of the battery. It is highly recommended that the battery is not usually discharged more than 30% of its total capacity, since in this way we will prolong the useful life of the battery and exceed 15 years of useful life. It is a battery model that requires minimal maintenance, such as checking the electrolyte level periodically. Made in Europe, Formula Star batteries offer an excellent quality-price-durability ratio.
2 x Victron 250A 4P Busbar + cover: Device used for high current distribution that also provides connections for batteries and/or DC equipment. Model with 4 high current connections and 250A.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 5m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
10 x Unifilar Cable 16 mm² SOLAR PV ZZ-F Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
10 x Unifilar Cable 16 mm² SOLAR PV ZZ-F Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
2 x Unifilar Cable 50 mm² POWERFLEX RV-K Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.
2 x Unifilar Cable 50 mm² POWERFLEX RV-K Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.
1 x Watertight Box 150x110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.
1 x LEGRAND 40A Modules Parallel Connection Splitter: Perfect for gathering the cables coming from the solar panels and connecting them to the splitter. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.
3 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard on solar panels and do not require any type of tool to be able to assemble them on the cable.
2 x 16mm Cable Eye Terminal – 8mm Eye: Used to crimp 16mm section wiring and make the connection on a 8mm diameter screw.
2 x 50mm Cable Eye Terminal – 10mm Eye: Used to crimp 50mm section cables and make the connection on a 10mm diameter screw.
4 x 50mm Cable Eye Terminal – 8mm Eye: Used to crimp 50mm section cables and make the connection on a 8mm diameter screw.
2 x 50mm Cable Eye Terminal – 6mm Eye: Prepared for use with 50mm section wiring and for a 6mm diameter screw.
