Inverter Victron EasySolar-II 48V 3000VA MPPT 250V 70A GX

Compare

$2,019

It is the option offered by Victron all in one, inverter equipped with a 250V and 70A MPPT regulator, a 35A to 48V battery charger.
 
Characteristics Inverter Victron EasySolar II 48V 3000VA MPPT 250V 70A GX
The inverter part corresponds to a Multiplus II Inverter-Charger. It has a power of 3000VA (2400W) with connection to 48V batteries. The wave generated by the inverter is a pure sine wave, which allows the correct operation of all the equipment in a home, such as televisions, lights, washing machines, etc.
The inverter emits 230V single-phase pure sinusoidal current through a copper winding, which guarantees a longer duration and greater stability in the production of the electrical wave.
The battery charger part is a 48V charger capable of supplying the batteries with a maximum current of 35A per hour of operation. Through the battery charger, we can charge the batteries through a source of energy external to the solar installation, very useful when there are rainy and cloudy days, where the solar panels are not capable of supplying the energy requested by the home or by the consumer.
Through the input of the battery charger, the 3000VA 48V Easy Solar is capable of charging the batteries with the current produced by a gasoline or diesel generator or from the electrical network. 
 

 
The part of the charge regulator includes 1 MPPT charge regulator with a maximum voltage of 250V and a maximum current of 70A, thus allowing us to have up to 4000VA of solar panels without the need to buy any additional regulator, so we can install about 10 400W panels, which are currently among the most powerful in the 24V range.
We can also install grid connection panels, for example 280W, that although the inverter is at 48V, the MPPT charge controller will adjust the appropriate voltage. If we put 280W solar panels, we can install about 15 panels grouped in such a way that we can take advantage of the maximum 250V of the regulator. 
 

 
The function of the Victron EasySolar II is to combine an MPPT charge controller with a Multiplus II charger inverter in one device. Said inverter is installed very easily, since it has all the connections in the lower part of it.
The Victron EasySolar II 48V 3000VA MPPT 250V 70A GX has communications and also the LCD integrated in the inverter body itself, the GX Control. In addition, the Easy Solar II has access to the Victron VRM portal.

Category: