Victron Multiplus 48V 3000VA 35+50A inverter, conventional inverter and when the batteries lose voltage, it activates the generator.
Characteristics of the Victron Multiplus 48V 3000VA 35+50A Inverter
The Victron Multiplus 48V 3000VA 35+50A Inverter with MultiPlus function, which, in short, combines a powerful pure sine wave inverter, in addition to having a battery charger that adapts according to the instantaneous requirements of the solar installation.
What function does the Inverter charger have?
An inverter charger has two well-differentiated parts. On the one hand, we have the inverter that performs the typical functions of a conventional inverter. On the other hand, the charger is in charge of activating an alternative energy generator to the solar panels in case the batteries drop below the minimum voltage that allows it to work; It is in this case, when the charger activates the generator and simultaneously feeds both the batteries (charges the batteries) and also supplies power to the home or warehouse if it is required.
The MultiPlus function includes the following features:
Two AC outlets: The MultiPlus function is responsible for continuing to supply energy to the loads in the event of a blackout or disconnection from the electrical network, and is also capable of doing so in less than 20 milliseconds, allowing any electronic equipment, whether they are computers , televisions etc., can continue to function without interruption.
Unlimited power due to its parallel operation: 6 equal inverters can be connected to increase their output power, interesting for installations that are going to be expanded.
Allows three-phase operation: In addition to a parallel connection, 3 equal units can be enabled to give rise to a three-phase output
Unlimited power of the generator: The battery charger that it incorporates is very powerful, with which it may use a lot of current from the generator or from the electrical network, which is why this inverter charger can establish a maximum input current from the network or from the generator
Increase in the electrical capacity of the generator: When a power peak is required at a certain time, which is common in photovoltaic systems, the Victron Multiplus Inverter will compensate for the possible lack of power from the generator or from the electrical network through the battery power.
Four-stage variable charger and dual battery bank charging: Provides a variable battery system through software installed on the inverter-charger itself.
Sinus Max technology of the Victron Multiplus Inverter 48V 3000VA 35+50A
The Victron Multiplus 48V 3000VA 35+50A Inverter has been developed to be used in a number of applications. Victron decided to create a sinusoidal charger inverter with characteristics that are difficult to find in the nautical and photovoltaic market because it uses high-frequency hybrid technology.
Thanks to this advance, the Victron Multiplus 48V 3000VA 35+50A Inverter is a quality product, prepared to work in adverse conditions, in addition to guaranteeing correct operation over time, well prepared for corrosion and atmospheric agents that may be harmful to electronic devices.
Additional Starting Power of the Victron Multiplus Inverter 48V 3000VA 35+50A
This is the unique feature of the Victron Multiplus 48V 3000VA 35+50A Inverter, equipped with a very high starting power, which allows it to reach performance levels that traditional high frequency is not capable of reaching. That is why the Victron Multiplus 48V 3000VA 35+50A Inverter is prepared to supply the most complicated loads, such as computers or low-power electrical devices.
Transfer of the load to another AC source of the Victron Multiplus Inverter 48V 3000VA 35+50A
For lower power Victron Phoenix models, we recommend the “Filax” automatic transfer switch, due to its extremely short switching time, thus allowing the correct operation of computers and other electronic equipment.
