The Victron Smart Solar MPPT 150V 60A Regulator, maximizer that provides maximum performance in any panel of solar installations.
Characteristics of the Victron Smart Solar MPPT 150V 60A Regulator
The Victron Smart Solar MPPT 150V 60A Regulator is characterized by:
– Ultra-fast tracking of the Maximum PowerPoint (MPPT).
– Advanced detection of the Maximum PowerPoint in case of partial cloudiness.
– Exceptional conversion efficiency
– Flexible charging algorithm, A fully programmable charging algorithm.
– Extensive electronic protection.
– Internal temperature sensor.
– Integrated Bluetooth Smart.
– GO. Direct.
– Remote On/Off.
– Programmable relay.
– Optional: connectable LCD screen
Relevant aspects MPPT Regulator 150V 60A Victron Smart Solar
The Victron Smart Solar MPPT 150V 60A Regulator is compatible with Color Control GX, that is, it offers intuitive control and monitoring of all the products connected to it, what’s more, the Victron Smart Solar MPPT 150V 60A Regulator in addition to monitoring and controlling products in the Color Control GX, the information also for remote monitoring without any cost.
The MPPT 150V 60A Smart Solar Regulator, when connected to 12V batteries, supports a maximum power of 860W, so the photovoltaic energy produced in excess will not be stored.
When the connected batteries are 24V, the maximum power that the regulator can manage will be, 1720W. In case 36V batteries are connected, the regulator will be able to manage up to 2580W, and when the regulator is connected to 48V batteries it will be able to work up to a panel power of 3440W.
It should be noted that these measurements do not determine a maximum that when the MPPT regulator stops working, but it is the maximum power that is lost when the solar panels exceed their production, hence the importance of the consonance between the number of photovoltaic panels, the installed charge regulator and the connected batteries.
The Victron Smart Solar MPPT 150V 60A Controller counts as a protection measure with reverse polarity of the battery (fuse, not accessible by the user) and reverse polarity / Output short circuit / over temperature.
Optional accessories compatible with this Victron MPPT SmartSolar Regulator
Display for Victron SmartSolar MPPT Controller. This device, which is sold separately, is used to monitor all the information handled by the charge regulator on a display. It is installed in a simple way, since it is embedded in the body of the regulator itself. In addition, it has 4 buttons to be able to configure internal operating parameters such as load values and no production figures.
