This Growatt ARK BDC 95045-A1 Lithium Battery BMS, interface between Growatt ARK batteries and Growatt MIN-XH hybrid inverter.
Technical characteristics BMS Lithium Battery Growatt ARK BDC 95045-A1
The Growatt ARK BDC 95045-A1 Lithium Battery BMS from the manufacturer Growatt is a controller used to manage communication with the inverter, as well as the charging and discharging of the connected modules. This Growatt ARK BDC 95045-A1 Lithium Battery BMS controller is suitable for forming an ARK XH system, compatible with Growatt MIN-XH and MOD-XH inverters.
This Growatt ARK BDC 95045-A1 Lithium Battery BMS is ready to be installed in any environment, thanks to its IP65 protection. It comes ready to be installed on top of the Growatt ARK 2.5H-A1 Lithium Battery Module Tower. The tower can be anchored to the wall or mounted on the ground. It has passive natural cooling, so we will not have any noise during its operation.
This Growatt ARK BDC 95045-A1 Lithium Battery BMS is compatible only with Growatt ARK 2.5H-A1 Lithium Battery modules and requires a minimum of 2 accumulator modules and a maximum of 7 units.
In this way it is capable of managing the storage of a system between 5.12kWh and 17.92kWh since each module is 2.56kWh. The communications wiring with the inverter is also specific, it is supplied separately and a base or lower support is also required if we are going to install the batteries in the form of a tower resting on the ground.
The Growatt ARK BDC 95045-A1 Lithium Battery BMS supports a maximum load of 25A to the battery modules, with a peak of up to 50A, so the maximum power supported by the system depends on the working voltage.
This varies with the inclusion of more modules, since in the battery part, the BMS can have an operating range of between 90 and 400V, while in communication with the inverter, this range remains higher, between 360 and 400V the 550V.
Installation BMS Lithium Battery Growatt ARK BDC 95045-A1
One of the great advantages of the Growatt ARK BDC 95045-A1 Lithium Battery BMS is that it is installed in a very simple way, without the need for any cabinet and without visible cables between the modules. You can start from an installation with the minimum number of modules and progressively expand according to your needs. It will only be necessary to take into account the limits of modules that this BMS controller supports.
