Fronius Primo 8.2-1 WLAN/LAN/WEB Server inverter with simple standardized mounting system and maximum flexibility in system design.
The communicative inverter for the optimization of energy management
The Fronius Primo, in power categories between 3.0 and 8.2 kW, completes the SnapINverters range. This transformerless single phase inverter meets the needs of any home. Its innovative SuperFlex design offers maximum flexibility in system design and with the SnapINverter mounting system, installation and maintenance are easier than ever. It includes a communications package with WLAN connection, power management, numerous interfaces and much more, offering the user a comprehensive experience and complete information about their installation.
Technology
SNAP INVERTER TECHNOLOGY
The SnapINverter generation of inverters is characterized by its simple standardized mounting system. Installation and maintenance are easier than ever. One of the special characteristics in the design of the equipment is the separation between the connection area and the area of the power stages. Both zones are mounted separately. After mounting the lightweight wall bracket and the equipment cabling, the power stage is installed. The innovative housing opening concept makes assembly and service extremely easy. The inverter is hooked into the wall bracket to secure it afterwards. Therefore, in case of service it is not necessary to remove the entire inverter, but only the power stage. All wiring stays in place.
TECHNICAL DATA FRONIUS PRIMO
DATA IMPUT
PRIMO 5.0-1
PRIMO6.0-1
PRIMO 8.2-1
Number of MPP followers
2
Max input current (Idc max 1/ Idc max 2)
12A/12A
18A/18A
Maximum short circuit current of MPP1/MPP2 (Isc pv) *
24 A / 24 A
36A/36A
DC input voltage range (Udc min. – Udc max.)
80 – 1000 V
Commissioning voltage (start Udc)
80 V
MPP voltage range
80 – 800 V
Number of DC inputs
2 + 2
Max PV generator output (Pdc max.)
7,5 kWpico
9,0 kWpico
12,3 kWpico
OUTPUT DATA
PRIMO 3.0-1
PRIMO 3.5-1
PRIMO 3.6-1
Rated AC power (Pac,r)
5.000 W
6.000 W
8.200 W
maximum power output
5.000 VA
6.000 VA
8.200 VA
AC output current (Iac nom.)
21,7 A
26,1 A
35,7 A
Grid coupling (voltage range)
1 ~ NPE 220 V / 230 V (180 V – 270 V)
Frequency (frequency range)
50 Hz / 60 Hz (45 – 65 Hz)
Nonlinear distortion coefficient
< 3 %
Power factor (cos φac,r)
0,85 - 1 ind. / cap
GENERAL DATA
PRIMO 3.0-1
PRIMO 3.5-1
PRIMO 3.6-1
Dimensions (height x width x depth)
645 x 431 x 204 mm
Weight
21,5 kg
protection type
IP 65
protection class
1
Overvoltage category (DC / AC) 1)
2 / 3
nocturnal consumption
< 1 W
investor concept
without transformer
Refrigeration
Regulated air cooling
Facility
Indoor and outdoor installation
Ambient temperature range
-40 - +55 °C
Permissible air humidity
0 - 100 %
maximum altitude
4.000 m
DC connection technology
4x X+ and 4 x DC screw terminals 2.5 - 16 mm²
Main connection technology
CONNECTION 3-pole AC screw terminals 2.5 - 16 mm²
Certificates and compliance
DIN V VDE 0126-1-1/A1, IEC 62109-1/-2, IEC 62116, IEC 61727,
AS 4777-2, AS 4777-3, G83/2, G59/3, CEI 0-21, VDE AR N 4105 2)
Country of manufacture
Austria
PERFORMANCE
PRIMO 5.0-1
PRIMO 6.0-1
PRIMO 8.2-1
Maximum performance
98,1 %
98,1 %
98,1 %
European Yield (ηEU)
97,1 %
97,3 %
97,5 %
MPP Fitting Performance
> 99,9 %
SAFETY EQUIPMENT
PRIMO 5.0
PRIMO 3.5-1
PRIMO 3.6-1
DC insulation measurement
Yes
Overload behavior
Duty point displacement, power limitation
DC disconnector
Yes
Reverse polarity protection
Yes
INTERFACES
PRIMO 5.0-1
PRIMO 6.0-1
PRIMO 8.2-1
WLAN / Ethernet LAN
Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
6 inputs and 4 digital inputs/outputs
Wave Control Receiver Interface
USB (Conector A) 2)
Datalogging, inverter update via USB
2 RJ 45 connectors (RS422) 2)
Fronius Solar Net
Warning output 2)
Energy management (potential free relay output)
Datalogger and web server
Including
External input 2)
S0-Meter / Input interface for overvoltage protection
RS485
Modbus RTU SunSpec or meter connection
1) According to IEC 62109-1.
2) Also available in the light version.
