The Huawei SUN2000-3.6KTL-L1 36000W Inverter, a model prepared for self-consumption installations, between 2kW and 6kW of power.
Characteristics of the Huawei SUN2000-3.6KTL-L1 3600W Inverter
It is a modern grid-connected inverter prepared for more advanced self-consumption installations. Compared to the previous generation, this is a revolutionary leap, combining a number of improvements to keep up with other options on the market. Another important feature of the upcoming model is that it can work as a classic grid-tied inverter or can complement the RESU H series of high-voltage LG batteries.
Thanks to this, you can use it in direct self-consumption installations without batteries, a much cheaper option to be able to expand in the future with the inclusion of a battery to reduce our dependence on the electricity grid. In addition, we can choose batteries from more options, the current ones from LG of 7 and 10kWh and also the modular ones from Huawei to be able to reach up to 30kWh of capacity.
Like the previous model, the Huawei inverter has 2 MPPT trackers. Which means that our photovoltaic field can have two different orientations without affecting the production of one. It has a wider working range and lower starting voltage.
The working range of your regulator is between 90 and 560 V, so it can be put into operation using 4 battery panels of 60 cells. Its operating voltage has a high limit, so we can use any type of panel, as long as we comply with the range defined by the manufacturer. It should also be noted that if we use LG batteries, we will limit the maximum operating voltage, and this will not happen with Huawei batteries.
It also incorporates an internal Wi-Fi antenna and thanks to which we won’t need more than our smartphone to start it up, configure it and connect it wirelessly to our router. If we need wired connectivity or provide it with 4G connectivity, two accessories can be purchased to provide this type of connection to Huawei’s online services.
This inverter is compatible with the single-phase Chint wattmeter and also with other models from the manufacturer Carlo Gavazzi. To confirm compatibility with other wattmeters, contact us or consult the technical data sheet in each case.
With a high operating efficiency of over 98%, it has the best expandability capabilities at a competitive price. It is a hybrid inverter model thanks to its possibilities in self-consumption with batteries, which means that, later, you will not need to purchase any additional accessories.
Below is the efficiency curve of the Huawei SUN2000-3.6KTL-L1 3600W Inverter:
Huawei SUN2000-3.6KTL-L1 3600W Inverter Applications
The Huawei SUN2000-3.6KTL-L1 3600W Inverter needs a connection to the electrical network in order to work. If we want to increase our proportion and ratio of self-consumption, but our consumption does not adjust to the hours of photovoltaic production, we can store the surplus production that is not used in a high-voltage lithium battery. It is important to pay attention to the maximum working voltages, since with LG batteries we cannot exceed 495V in an open circuit state.
Among its numerous internal electrical protections, anti-island protection, polarity reversal, short circuits, overcurrent, overvoltage, overtemperature and many more stand out.
In addition, it has an internal Wi-Fi connection, through RS485 communication and the front LED indicator, easy to start and monitor its operation. It communicates wirelessly with our mobile terminal so that it can be started and monitored in detail. After connecting it to the Internet, in the Huawei app and portal, we will have all the information related to the installation.
Huawei SUN2000-3.6KTL-L1 3600W Inverter Connection
1: Informative LED’s section.
2: Inverter front casing.
3: Anchor kit.
4: Vertical hanger bracket.
5: Rear heat sink.
6: Vent valve.
7: Safety screw for the disconnector.
8: DC disconnector.
9: PV1 Photovoltaic Terminals.
10: PV2 Photovoltaic Terminals.
11: Battery terminals.
12: Port for GPRS/Ethernet dongle.
13: Antenna.
14: COM ports.
15: Alternate AC output.
16: Grounding.
Huawei SUN2000-3.6KTL-L1 3600W inverter installation
The installation is very simple and easy, since thanks to its compact and light design, the installation task is much easier. It has IP65 protection and has a silent operation, since it does not have moving parts such as fans, so it can also be installed outdoors as long as it is not subject to direct sunlight. Its cooling is by natural convection, which reduces the chances of failure in the ventilation system.
