It is the option offered by Victron all in one, equipped with a 50A MPPT charge regulator, with a maximum input voltage of 100V.
Characteristics Inverter Charger Regulator Victron Energy Easy Solar 1600Va 12V with MPPT Regulator 100V 50A
The inverter part has a power of 1600VA with connection to 12V batteries. The wave generated by the inverter is a pure sine wave, which allows the correct operation of all the equipment in a home, such as televisions, lights, washing machines, etc. The inverter emits single-phase 230V pure sinusoidal current through a copper coil, which guarantees a longer life for the device, since the way of emitting the current is mechanical, which minimizes failures of electrical components.
The battery charger part is a 12V charger capable of supplying the batteries with a maximum current of 70A per hour of operation. Through the battery charger, we can charge the batteries through a source of energy external to the solar installation, very useful when there are rainy and cloudy days, where the solar panels are not capable of supplying the energy requested by the home or by the consumer.
Through the battery charger input, the 1600VA 12V Easy Solar is capable of charging the batteries through a gasoline or diesel generator or from the electrical network.
The part of the charge regulator has a built-in MPPT regulator of 100V maximum voltage and 50A maximum current, thus allowing us to have up to 700W of solar panels, so we will make the most of it with 4 200W panels, which are currently the most powerful of the 12V range.
We can also install 24V panels, even though the inverter is 12V, the MPPT charge controller will lower the voltage from 24V to 12V. If we put 24V solar panels, there is no problem if we go over power, but the regulator will limit it to 700W.
The function of the victron Easy Solar 1600Va 12V is to combine an MPPT charge controller with an inverter charger and an AC distributor in just one device. This inverter is very easy to install, since all the connections are pre-installed in the lower part of it to be able to arrive with MC4 terminals from the panels and exit with a single cable in alternating current.
The victron Easy Solar 1600Va 12V has three connections in that box for the input of the solar panels, that is, we can connect up to three strings of panels in our photovoltaic system as long as we do not exceed the maximum voltage of 100V of the field of panels that the regulator allows us.
The complete connection diagram of the Easy Solar 12V 1600VA inverter can be seen below, since in addition to being able to connect the solar panels and batteries, we will be able to monitor all the values of the installation through the Victron Color Control GX accessory, knowing this forms the amount of energy that we are producing, the amount of energy that we are consuming as well as the remaining autonomy of the battery at all times.
About the charger inverter, the victron Easy Solar 1600Va 12V share the battery cables that are already included in the inverter itself. The batteries can be charged in two different ways, the main one is by solar energy through the MPPT regulator and in case this is not enough we can supply it with the battery charger also integrated in the inverter. The battery charger will power the system’s batteries using a generator or mains power.
The victron Easy Solar 1600Va 12V alternating current distributor consists of an RCD and four alternating current outputs protected by two 10A and two 16A circuit breakers. One of the 16A outputs is controlled by the alternating current input that it will activate when AC power is available.
The victron Easy Solar 1600Va 12V is equipped with a special Victron technology called Power Assist which allows mains or generator power from an overload, adding extra power from the inverter when needed.
In addition to all these advances, the inverter has exclusive software for solar applications where, through a computer program, we can configure the system for both autonomous and network-connected applications.
