The Isolated Solar Kit 3000W 24V 6700Whdia, a system that offers great performance for homes with sporadic use, summer or weekend.
Characteristics of the 3000W 24V 6700Whdia Isolated Solar Kit system
The photovoltaic system provided in the attached file can generate 7.29 kWh per day in winter (3 hours of sunshine) and 17.01 kWh in summer (7 hours of sunshine).
The characteristics of the proposed system are the following:
Installed solar generation: 2,430 W
Maximum output power to the box: 3000W
Daily production in winter: 7.29 kWh
Summer: daily production: 17.01 kWh
Annual average daily production: 12.15 kWh
Components of the Isolated Solar Kit 3000W 24V 6700Whdia
6 x 405W Deep Blue 3.0 JA Solar Mono Solar Panel: has very particular characteristics. It contains half cells that offer very high efficiency with 405W of power. It has PERC technology and is from the world-renowned manufacturer JA Solar.
1 x Structure 6 Panels 30-45mm Coplanar Falcat: It is a support to be able to place 6 solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and this will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for roofs with metal decks, sandwich panels or concrete slabs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.
4 x ROLLS 6V S6 L16-HC S550 battery: It has a 2-year warranty plus a 5-year extendable warranty. They are special for solar energy, which means that they withstand slow discharges very well every day. They have an average life of about 1,500 cycles, understanding a cycle as a process of complete charging and discharging of the battery. It is highly recommended that the battery is not usually discharged more than 30% of its total capacity, since in this way we will extend its duration and we will be able to reach 8-10 years of estimated useful life. The battery connection bridges are included with them. To correctly connect the stationary battery, you have to join the different batteries with each other, as we will attach in the installation manual.
1 x Victron Smart Solar MPPT 150V 85A Regulator: It is a controller with a charge current of up to 85A and a voltage of up to 150V. In addition, the Smart Solar MPPT 150/85 charge controller has ultra-fast Maximum PowerPoint Tracking (MPPT). The Smart Solar MPPT 150/85 charge controller has advanced detection of the maximum PowerPoint in the event of partial cloud cover. On the other hand, the Smart Solar MPPT 150/85 charge controller model, offered by AutoSolar, has exceptional conversion efficiency, a flexible charging algorithm, reprogrammable auxiliary relay, as well as extensive electronic protection. It has a 5-year guarantee.
1 x Victron Multiplus 24V 3000VA 70+16A Inverter: 3000VA inverter that will allow this power to be consumed at the same time. In addition to being a pure sine wave inverter, it incorporates a battery charger; This inverter has a function that allows the electrical network or the generator to be interconnected to it, and in the event that the batteries are exhausted, it will be the same inverter that starts the generator (in the event that the generator has automatic start) or the that gives way to the electrical network to charge the batteries, so that we will never run out of service and the state of charge of the batteries will not bother us in any way. Once the generator or the electrical network enters, the batteries will be charged and when they are at an optimal level, it will be the inverter that cuts off the supply from the electrical network or the generator and goes back to the normal state, which will be to charge the batteries using solar panels. The charger of this inverter is 70A at 24V.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll Unifilar Cable 10mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Unifilar Cable 50 mm² POWERFLEX RV-K Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the requirements of most demanding industrial sites, such as low-voltage industrial connections, urban networks, installations in buildings.
1 x Unifilar Cable 50 mm² POWERFLEX RV-K Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.
1 x Watertight Box 150x110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.
1 x LEGRAND 40A Modules Parallel Connection Splitter: Perfect for gathering the cables coming from the solar panels and connecting them to the splitter. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.
2 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all connector models that are offered as standard in solar panels and do not require any type of tool to be able to assemble them on the cable.
4 x 50mm Cable Eye Terminal – 8mm Eye: Used to crimp 50mm section cables and make the connection on a 8mm diameter screw.
3 x Battery Interconnection Cable: It is made to measure with the requested terminals, depending on the diameter of the battery screw to which it is going to be connected. It has all the technical characteristics that allow the interconnection of batteries with total safety.
2 x 10mm Cable Eye Terminal – 8mm Eye: Prepared to be connected with 10mm cables and to a 10mm terminal, it is a durable eye terminal prepared to withstand high temperatures, erosion and humidity.
