The Solar Kit Isolated Installation 5000W 24V 11200Whdia, a system to power the consumption of a habitual residence.
Characteristics of the Solar Kit system Isolated Installation 5000W 24V 11200Whdia
The total storage capacity of the batteries offered is 14.40 kWh. For reasons of battery life and maintenance, it is not recommended to discharge the battery beyond 91% of its full capacity, so the usable energy stored in the battery is 13.10 kWh.
The characteristics of the proposed system are the following.
Installed solar generation: 2,760W
Household Max Output: 5000VA
Daily production in winter: 8.28 kWh
Summer daily production: 19.32 kWh
Annual average daily production: 13.80 kWh
Accumulated storage battery: 14.40kWh
Useful battery storage: 13.10 kWh
Solar Kit Components Isolated Installation 5000W 24V 11200Whdia
6 x JA Solar Panel 460W 24V Monocrystalline PERC: made of monocrystalline silicon from the famous international brand JA Solar, guaranteed for 25 years. It offers one of the best products for our photovoltaic systems and is one of the best performing monocrystalline models with excellent value for money. It can supply the solar system with about 1350 Wh per day in winter and almost twice as much in summer. PERC technology with high performance monocrystalline half cells offers more than 20% efficiency for the module size. It measures 2120 x 1052 x 35mm and includes a junction box for each positive and negative wire with MC4 connectors on each end. The solar module includes an assembled aluminum frame that allows for additional dimensions and is ready to be fixed to any structure.
1 x Structure 6 Panels 30-45mm Coplanar Falcat: It is a support to be able to place 6 solar panels on a roof that has a correct inclination and orientation. The panels are placed vertically on the structure, and it will have the same inclination as the surface to which it is installed. In this case, the structure is designed for panels of any length and has universal pressers that accept a panel profile of between 30 and 45mm. It is the perfect type of structure for metal deck, sandwich panel or concrete slab roofs. This product is shipped in a single pack and can be joined to more of the same structures using the corresponding joining kit.
1 x VE.Can to CAN-bus BMS Type B 1.8m Victron: is a cable used to connect a battery that has the CAN-bus function enabled and another non-Victron brand to a Victron system. This model is compatible with LG Chem Resu, AXIstorage, BMZ, Pylontech US2000/US3000/UP2500. At Autosolar we have both type A and type B and 1.8 and 5m.
1 x Victron Cerbo GX Monitoring: The Victron Cerbo GX monitoring device is an accessory that allows complete monitoring of our entire solar installation. An infinite number of Victron devices can be connected to it: Inverters of all its ranges, MPPT regulators, chargers, battery monitors, etc. It can also be connected to the Internet so that all the information is available on the VRM portal or only have local monitoring, for which it incorporates Bluetooth and the optional GX Touch 50 screen. It allows firmware updates and remote modification of the configuration of the components that we connect to it.
6 x Pylontech 24V UP2500 2.8kWh Lithium Battery: Advanced Lithium Ferrophosphate accumulator that allows us to have a Lithium technology accumulator at a very competitive price and with very attractive technical characteristics. Given that technology allows it, and thanks to its easily stackable format, it can be connected in parallel up to a maximum of 20 units. Everything is monitored by the internal BMS that distributes the energy between the cells and modules, preventing them from being overcharged or over discharged. This functionality in a lithium battery is of vital importance to guarantee its 6000 life cycles and its 10-year guarantee.
1 x Rack 19″ up to 10 units Pylontech DC EM-S 6627: is a robust structure that allows the correct fastening, connection and location of the battery modules of the most varied characteristics among which the 2.4kWh Pylontech US2000B Plus 48V and 3.5kWh Pylontech US3000 Plus 48V batteries stand out and in conclusion for any type of battery with a standard 19-inch format. The Pylontech 1866 Battery Rack Cabinet has slots that facilitate the correct ventilation of the batteries installed inside and wheels or legs to move the system if necessary or keep it fixed where desired, does not include trays to support the batteries.
4 x EM-S D600 Rack Tray: is used to support batteries of this format that are located inside a cabinet. This tray supports an approximate weight of 50Kg and helps us to better distribute the weight of the batteries so that they are not only held by their front part.
1 x Busbar box for 250A parallel connection: This small bus bar is intended to facilitate the grouping of several lithium batteries. Thanks to this product, you can connect up to 3 groups of batteries to the same inverter. Thanks to the function offered by the 250A Lithium Busbar Box for parallel connection, you can triple the autonomy in your photovoltaic solar system.
1 x Victron Smart Solar MPPT 150V 85A Regulator: It is a controller with a charge current of up to 85A and a voltage of up to 150V. In addition, the Smart Solar MPPT 150/85 charge controller has ultra-fast maximum PowerPoint tracking (MPPT). The Smart Solar MPPT 150/85 charge controller has advanced detection of the maximum PowerPoint in the event of partial cloud cover. On the other hand, the Smart Solar MPPT 150/85 charge controller model offered by AutoSolar has exceptional conversion efficiency, a flexible charging algorithm, reprogrammable auxiliary relay, as well as extensive electronic protection. It has a 5 year guarantee.
1 x Victron Multiplus 24V 5000VA 120+100A Inverter: 5000VA inverter that will allow this power to be consumed at the same time. In addition to being a pure sine wave inverter, it incorporates a battery charger; This inverter has a function that allows the electrical network or the generator to be interconnected to it, and in the event that the batteries are exhausted, it will be the same inverter that starts the generator (in the event that the generator has automatic start) or the that gives way to the electrical network to charge the batteries, so that we will never run out of service and the state of charge of the batteries will not bother us in any way. Once the generator or the electrical network enters, the batteries will be charged and when they are at an optimal level, it will be the inverter that cuts off the supply from the electrical network or the generator and goes back to the normal state, which will be to charge the batteries using solar panels. The charger of this inverter is 120A at 24V.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
10 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Red: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
10 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements.
2 x Unifilar Cable 50 mm2 POWERFLEX RZ-1K Green: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.
2 x Unifilar Cable 50 mm2 POWERFLEX RV-K Black: Special for electrical installations. It is a halogen-free power cable. It is a flexible power cable designed to meet the most demanding industrial requirements, such as low voltage industrial connections, urban networks, installations in buildings.
1 x Watertight Box 150x110x70mm: Perfect for installing the Legrand Current Distributor inside, both 40A and 100A for larger installations.
1 x LEGRAND 40A Module Parallel Connection Splitter: Perfect for gathering the cables coming from the solar panels and connecting them to the splitter. From this moment, we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. Produces significant savings in meters of wiring.
2 x 16mm Cable Eye Terminal – 8mm Eye: Used to crimp 16mm section wiring and make the connection on a 8mm diameter screw.
4 x WEIDMULLER PVStick Connectors: They are the most recommended in the case of not having a crimper to be able to connect the usual MC4 connectors. They are compatible with all the connector models that are offered as standard on solar panels and do not require any type of tool to be able to assemble them on the cable.
8 x 50mm Cable Eye Terminal – 8mm Eye: Used to crimp 50mm section cables and make the connection on a 8mm diameter screw.
2 x Pylontech LV Battery-Inverter Cables: they allow us to connect power and data between the Pylontech batteries and the inverters that have them connected. AWG 4 section cables and 2 meters long that support a maximum of 120A and a 3-meter communications cable with crimp for CAN communications.
