The Pylontech 9kWh 5600W 14000Whdia Lithium Solar Kit, a system that can cover the consumption of casual homes and summer apartments.
Characteristics of the Pylontech 9kWh 5600W 14000Whdia Lithium Solar Kit system
The solar energy system proposed in the annex can generate 10.50 kWh per day (3 hours of sun) in winter and 24.50 kWh per day (7 hours of sun) in summer.
The total storage capacity of the supplied battery is 10.80 kWh. For reasons of durability and maintenance, it is not recommended to discharge the battery beyond 91% of its total capacity, so the available energy stored in the battery is 9.83 kWh.
The recommended system characteristics are as follows.
Installed solar power: 3,500W
Daily production in winter: 10.50 kWh
Summer daily electricity generation: 24.50 kWh
Annual average daily production: 17.50 kWh
Accumulated storage battery: 10.80kWh
Practical battery accumulation: 9.83 kWh
Components of the Pylontech 9kWh 5600W 14000Whdia Lithium Solar Kit
7 x Solar Panel 500W Deep Blue 3.0 JA Solar: It has some very special features. It contains a half cell that provides a very high level of efficiency at 500W of power. It uses PERC technology and is made by the world-famous manufacturer JA Solar. The 500W Deep Blue Solar Panel is a JA Solar brand panel, one of the best manufacturers seen in the industry today. This range has PERC-type monocrystalline cells that give the panels magnificent technical properties. These cells offer the potential for higher productivity and efficiency than regular panels with the same number of cells.
1 x Voltronic VM IV 5600W 48V Inverter Charger pre-assembled with protections: providing up to 5600W of output power from a 48V battery. The inverter has an input for the solar panel used to supply power and charge the 48V battery. This power flows through an internal MPPT type charge controller with a charging capacity of 120A and is used to boost the battery charge and make it ready for use. Additionally, a 48V battery charger with up to 100A charging force is included in case you need to recharge your battery from a compatible generator or external mains. The entire set is pre-assembled and wired on a metal plate that can be easily hung on the wall. Simply connect the input of the solar panel to the corresponding input of the fuse that protects it, and the consumption to the output of the circuit breaker. The shield plate must be placed high enough for the battery cables to properly reach the terminals. The internal cable is compatible with Pylontech batteries.
3 × 3.5kWh Pylontech US3000C 48V Lithium Battery: advanced Lithium-ion Phosphate batteries available with lithium technology batteries with very attractive technical characteristics at a very competitive price. Thanks to the easily stackable format, up to 80 batteries can be connected in parallel in groups of 16 units, as technology allows. Everything is monitored by an internal BMS that distributes power between cells and modules to prevent overcharging or overdischarging. This characteristic of lithium batteries is important to ensure a long life.
3 x Brackets Pylontech 3.5kWh US3000 48V: securely connects lithium battery modules and ensures ventilation between modules and the space required for correct installation. These are required if you do not have a rack cabinet for this battery model.
1 x SC8000iY Tensite Inverter Generator—A generator used to generate power in remote areas where the mains cannot reach. Its small and quiet size make it ideal for construction, industry, home, agriculture and anywhere a quality generator is needed.
1 x Structure 3 Panels 30-45mm Coplanar Falcat: support to allow the placement of 3 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
1 x Falcat Universal Union Kit up to 45mm: contains all the necessary elements to connect the solar panels when creating a solar system with structures. This kit is specially designed to join two Falcat structures prepared for panels with a profile thickness of up to 45mm.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 30m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x WEIDMULLER PVStick Connectors—Most recommended if you don’t have crimp tools that can connect regular MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.
