The Permanent Home Solar Kit 10000W 48V 48000Whdia, the perfect system to run the home plus a little more industrial consumption.
Characteristics of the Solar Kit Permanent Housing System 10000W 48V 48000Whdia
The photovoltaic system provided in the attached file can generate 29.16 kWh per day in winter (3 hours of sunshine) and 68.04 kWh in summer (7 hours of sunshine).
The total storage capacity of the offered batteries is 64.80 kWh. For reasons of durability and care, it is not recommended to discharge the battery beyond 50% of its total capacity, therefore the available energy stored in the battery is 32.40 kWh.
The characteristics of the proposed system are the following.
Installed solar power: 9,720 W
Max output to box: 5000VA
Winter daily production: 29.16 kWh
SUMMER daily production: 68.04 kWh
Annual average daily production: 48.60 kWh
Total battery capacity: 64.80 kWh
Practical battery storage: 32.40 kWh
Components of the Permanent Housing Solar Kit 10000W 48V 48000Whdia
24 x Solar Panel 405W Deep Blue 3.0 JA Solar Mono: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.
4 x Structure 6 Panels 30-45mm Coplanar Falcat: support to allow the placement of 6 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
24 x Stationary Battery 1350Ah 2V OPzV Ultracell UZV1350-2: a quality battery with excellent durability and low maintenance requirements. A complete set consists of at least 6 stationary accumulators with connection bridges for 12 V voltage. Developed specifically for solar energy, it is suitable for daily cycling. With a life expectancy of over 3,500 cycles depending on depth of discharge, it is one of the longest lasting lead-acid battery models. However, it is strongly recommended that you do not continuously discharge the battery beyond 40% of its full capacity on a regular basis. This extends the useful life of the battery, with an average life of more than 15 years. Ultracell is a renowned international manufacturer of energy storage that offers unmatched quality at very competitive prices due to the extraordinary properties of its products. These battery models do not require maintenance thanks to the electrolyte in the form of GEL.
2 x Voltronic Inverter Parallel Connection Kit: allows parallel connections in these compatible models. One card is required for each inverter, and multiple inverters can be connected on the same phase or a three-phase network can be built. A three-phase network requires at least three identical inverters and three cards.
2 x Voltronic Axpert MKS 5000W 48V MPPT 80 Inverter: Provides a very convenient solution for off-grid solar power systems as all system components can be integrated into the same device. You can see how the power flows in addition to the state of charge and battery voltage, real-time solar panel input current and battery output current, and a small graph on the same screen. When it comes to the backup generators that we can have in our solar system. The inverter is a pure sine wave inverter, the battery charger has a maximum load of 60A and an automatic start signal, and it integrates an MPPT maximum charge controller of 80A to connect the panel up to 4000W. The possibility of expanding this system allows up to 12 solar panels like the one offered, without changing or adding other elements. Starting from solar panel number 13, a charge controller must also be installed. The inverter warranty is 2 years.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 20m black: Special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
30 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
30 x Unifilar Cable 16 mm2 SOLAR PV ZZ-F Black: special for electrical installations. Halogen free power cable. It is a flexible power cable designed to meet the most demanding industrial needs.
2 x Unifilar Cable 50 mm2 POWERFLEX RZ-1K Green: special for electrical installations. Halogen free power cable. It is a flexible power cable designed for the most demanding industrial needs such as: low voltage industrial connections,
urban networks, installations in buildings.
2 x Unifilar Cable 50 mm2 POWERFLEX RV-K Black: special for electrical installations. Halogen free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, installations in buildings.
2 x Watertight Box 150x110x70mm: ideal for installing the Legrand power distributor inside. Both 40A and 100A are available for large installations.
2 x 100A Modules Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From now on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.
4 x 16mm Cable Eye Terminal – 10mm Eye: used to crimp a 16mm cable and connect it to a 10mm diameter screw.
8 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.
8 x 50mm Cable Eye Terminal – 8mm Eye: used to crimp 50mm gauge cables and connect 8mm diameter studs.
