The Permanent Home Solar Kit 3000W 24V 9000Whdia, system with 10 grid connection panels of the highest current power.
Characteristics of the 3000W 24V 9000Whdia Permanent Housing Solar Kit system
The photovoltaic system proposed in the annex can generate 4.86 kWh per day (3 hours of sun) in winter and 11.34 kWh per day (7 hours of sun) in summer.
The recommended system characteristics are the following:
Installed solar power: 1,620W
Household Max Output: 3000W
Daily production in winter: 4.86 kWh
Summer daily production: 11.34 kWh
Annual average daily production: 8.10 kWh
Components of the Permanent Housing Solar Kit 3000W 24V 9000Whdia
4 x Solar Panel 405W Deep Blue 3.0 JA Solar Mono: they have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world renowned manufacturer JA Solar.
1 x Structure 4 Panels 30-45mm Coplanar Falcat: support to allow the placement of 4 solar panels on the roof with the correct slope and orientation. The panels are placed perpendicular to the structure and have the same slope as the surface on which they are installed. In this case, the structure is designed for panels of any length and has a universal press that accepts panel profiles from 30 to 45 mm. This is the most suitable type of construction for metal roofs, sandwich panels or concrete slab roofs. The product is supplied in a single package and can be connected to multiple structures of the same type using the appropriate connection kit.
12 x OPzS Solar Battery 739Ah 2V Formula Star: it has an average useful life of more than 2,500 cycles, depending on the depth of discharge, understanding by cycle the complete charge and discharge process of a battery. In general, it is strongly recommended not to discharge the battery more than 30% of its full capacity. This will extend the life of the battery to over 15 years of use. This is a battery model that requires minimal maintenance. B. Periodic check of electrolyte level. Made in Europe, Formula Star batteries offer excellent value for money.
1 x Must Solar 3000W 24V MPPT 50A Inverter Charger: provides a very practical solution for isolated solar power systems, as all system components can be integrated into the same device. In addition to the state of charge and battery voltage, the real-time input current of the solar panel and the output current of the battery, and a small graph on the same screen, you can see if the power is flowing directly from the battery or from a backup generator If it comes, it can be used in the solar system. The inverter is a pure sine wave inverter with 3000W output power, the battery charger has a maximum load of 30A and automatic start signal, it also integrates a 50A MPPT charge controller. The Must Solar inverter warranty is 2 years.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Single Wire Cable 10mm2 H1Z2Z2-K 15m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll 10mm2 H1Z2Z2-K 15m Black Single Wire Cable: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Single Wire Cable 50 mm2 POWERFLEX RV-K Red: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.
1 x 50 mm2 Single Wire Cable POWERFLEX RV-K Black: special for electrical installations. Halogen-free power cable. It is a flexible power cable designed for the most demanding industrial needs, such as: low voltage industrial connections, urban networks, building installations.
1 x Waterproof Box 150x110x70mm: ideal for installing the Legrand energy distributor inside. Both 40A and 100A are available for large installations.
1 x 100A Module Parallel Connection Splitter: perfect for connecting the cables coming out of your solar panels to a splitter. From this point on, only two wires (one positive and one negative) can go to the charge controller. Get significant savings on cable meters.
2 x WEIDMULLER PVStick Connectors—Most recommended if you don’t have crimp tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and do not require tools to connect to the cable.
2 x 50mm Cable Eye Terminal – 8mm Eye: used to crimp 50mm gauge cables and connect 8mm diameter bolts.
2 x 50mm Cable Eye Terminal – 10mm Eye: used to crimp 50mm gauge cables and connect 10mm diameter screws.
