The Solar Treatment Kit with 0.75cv pump for swimming pools is a solar thermal treatment system that directly uses the sun’s energy.
Characteristics of the Solar Treatment Kit system with 0.75cv pump for swimming pools
The photovoltaic system provided in the attached file can generate 4.86 kWh per day in winter (3 hours of sunshine) and 11.34 kWh in summer (7 hours of sunshine).
The characteristics of the proposed system are the following:
Installed solar generation: 1,620 W
Daily production in winter: 4.86 kWh
Summer: daily production 11.34 kWh
Annual average daily production: 8.10 kWh
Components of the Solar Treatment Kit with 0.75cv pump for swimming pools
4 × 405W Deep Blue 3.0 JA Solar Mono Solar Panel: have very special properties. It contains a half cell that provides a very high level of efficiency with a power of 405W. Powered by PERC technology and supplied by world-renowned manufacturer JA Solar.
1 x Structure 4 Pan. 30-45mm Coplanar Rod Falcat: it is used to place solar panels on tiled roofs with the correct slope and orientation. Threaded metal rods are also included to be able to fix the structure to the roof without disassembling anything. The allowable panel thickness for these structures is a frame of 30-45 mm.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m red: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x Roll Unifilar Cable 6mm2 H1Z2Z2-K 10m black: special for electrical installations. Halogen-free flexible power cables for the most demanding industrial requirements.
1 x INVT BPD 1HP 0.75KW Solar Pumping Controller: This pump controller can be used for single-phase and three-phase pumps up to 1CV, perfect for running 230V water pumps. It has an LCD screen that allows you to check the operation of the pump. It also has an IP65 degree of protection.
2 x WEIDMULLER PVStick Connectors – Most recommended if you don’t have crimping tools that can connect normal MC4 connectors. They are compatible with all connector models that come standard with solar panels and require no tools to connect to the cable.
1 x Pool Pump 0.75CV Three-phase Ideal IPE2 50T: offers excellent quality and excellent performance. It is a product with your pool. Its motor is bipolar asynchronous and has IP55 protection. The wash pump is designed for continuous operation and is extremely quiet. The motor shaft is in stainless steel, the casing is in aluminum, the body, base, diffuser and impeller are in technopolymer. It has a pre-filter to keep solids out of the motor and pool cleaning system. With a maximum suction height of 3 m and a maximum pressure height of 15 m, the short cleaning circuit can clean 15 m3 per hour, allowing it to fully circulate more than 75 m3 of pool water in just 5 hours. surgery. With solar energy in winter it works about 3 hours, practically double in summer, up to 100 m3 due to the greater hours of light. All IPE3 pool pumps have the same 2.25-inch inlet and outlet diameter. It comes with a 2-year warranty.
